Tee Parklet Bracket

The Tee Bracket is a leveling and framing bracket for the long side of a parklet or floating deck. A tee bracket holds 2 2x6’s and an optional 4x4. Connect any number of tee brackets for a parklet of any length. Tee brackets are used in rectangular and builds that extend longer than 9.5' in any direction, including our 6-Piece and 10-Piece Kits. 
 
Specs: 
Lumber Sizes: 2x6, 4x4
Horizontal Opening Exterior: 1.875" x 5.875"
Horizontal Opening Interior: 1.5" x 5.5"
Sleeve Length (Interior): 5.5"
Gauge: 3/8" (bottom), 3/16" (sides)
Overall Size (excluding leveling foot): 5.875" x 5.375" x 5.375"
Color: Glossy Black Powder Coat
Fastening Holes: 3/8"
Leveling Foot Ground Clearance (Min): 1.25"
Leveling Foot Ground Clearance (Max): 7"
Leveling Foot Width: 2.5"
Threaded Rod Length: 6"
  
Features:
Leveling and bracketing in one for rapid build parklets
Exterior leveling hardware for adjustment before or after build
3/8" and 3/16" powder-coated steel
Leveling hardware and lag screws included
Weather resistant: black powder coat
American made
Multiple holes for hardware
 
What’s in the Kit?
    1 Tee Bracket with 7.25” leveling bracket foot
    1.5” lag screws
 
What’s NOT in the Kit? 
    Lumber
    Flooring or Decking
    Flooring and Framing Hardware
    
Lumber
This kit is intended to be used with standard deck framing lumber from your local lumberyard or home improvement retailer. 
 
Recommended maximum span of 2x6 is 9.5 feet. 
 
The dimensions of these brackets are for dressed lumber. Commonly referred to as 4x4’s or 2x6’s, the actual measurements of these are 3.5x3.5 or 1.5x5.5. It may be best to take the bracket to the store with you to test the size of the wood. 
 
Lag screws are included in this kit. Use 2 screws at a minimum in each piece of lumber. It is best if you drill a pilot hole before screwing in the lag bolt to avoid splitting the wood.